Maintain & Clean Your Dog Clippers

Proper maintenance of dog hair clippers keeps your equipment in top condition and ensures safe, effective grooming sessions. Investing time to clean and maintain your dog clippers, can extend their life and improve performance.

Importance to Maintain Dog Hair Clippers

1. Prevents dull blades and overheating

These two issues can cause discomfort or injury to your pet. Well-maintained pet clippers cut smoothly and precisely. This reduces tugging and hair pulling, making grooming a more pleasant experience for your dog. 

2. Prevent bacteria buildup

Hair and oils left on the dog hair trimmer blades can create a breeding ground for bacteria, posing health risks to both you and your pet.

3. Protect your investment

A good, certified puppy razor isn't cheap. Proper care ensures they work efficiently for years. Maintenance also minimizes costly repairs or frequent replacements.

4. Save time

Lastly, smooth and sharp blades reduce grooming time, minimizing stress for your dog and making grooming less of a chore.

Steps to Maintain Your Dog Hair Clippers

1. Clean the Blades After Each Use

After every grooming session, remove hair from the blades. Use a small dog vacuum brush, such as the one that comes with a dog clipper kit, to sweep away hair clippings. If your dog clippers have a removable blade, take it off for easier cleaning.

Once you’ve removed loose hair, wipe the blade surface with a soft cloth. Use blade wash or a specialized dog clipper cleaning solution for a deeper clean. Dip the blade into the solution, then turn on the dog hair trimmer for a few seconds to flush out any remaining hair or grime. Wipe the blade dry before storing.

2. Oil the Blades Regularly Blade

Oiling keeps dog clippers functioning smoothly. Apply a few drops of pet clipper oil to the blade teeth and any moving parts. Turn the dog clippers on for a few seconds to distribute the oil evenly. This step reduces friction and prevents the blades from overheating or wearing out too quickly. Remember, never use other types of oil, as they can damage dog hair clipper blades.

3. Check and Tighten Screws and Parts

Dog hair trimmers have screws and fasteners that may loosen over time. Inspect dog hair trimmers periodically to ensure all parts are secure. Tighten any loose screws, but don’t overtighten, as this can strip the threads. If a part looks worn or broken, consider replacing it to keep your dog hair trimmers in good working order.

4. Sharpen the Blades

Dull blades will pull on your dog’s fur. If you notice this happening, it’s time to sharpen the blades. Some dog hair clipper models allow for easy blade replacement, but if your dog hair clippers have high-quality blades, you can have them sharpened by a professional. Regular sharpening keeps the blades efficient and reduces the strain on the motor.

5. Disinfect the Blades

Hygiene your professional dog clippers by using dog hair clippers disinfectant spray to kill bacteria and germs. Spray the disinfectant on the blade after each use. This not only keeps dog hair trimmers sanitary but also protects your dog from infections. Make sure the blades are completely dry before you use or store them.

Related Reading: Pet Clipper Care and Blade Maintenance

How to Store Your Dog Hair Clippers?

After cleaning and oiling, store your dog hair clippers in a safe, dry place. Avoid leaving them in humid areas, as moisture can cause rust and damage the internal components. Use a protective case or pouch to keep dust and dirt away. If dog hair clippers come with a storage box, use it to keep all the components organized.

Keep the power cord wrapped neatly and avoid bending or twisting it. This prevents internal damage to the wiring. If your dog clippers are cordless, store the battery separately if recommended by the manufacturer. Make sure to charge the battery as instructed to maintain optimal performance.

Troubleshooting Common Dog Clipper Problems

Even with regular maintenance, you may encounter issues with your dog clippers. Here are some common problems and solutions:

1. Dog Clippers Overheating

Overheating usually occurs when dog clippers are used for long periods without breaks or when the blades are not properly oiled. To fix this, pause every 10-15 minutes to let dog clippers cool down. Check if the blades are oiled and adjust as needed. If overheating persists, you may need to replace the blade or have the pet clipper motor inspected.

2. Blades Cutting Poorly or Pulling Hair

If your pet clippers are pulling on your dog’s hair, the blades may be dull or dirty. Try cleaning and oiling them. If the problem continues, sharpen the blades or replace them. Make sure the blade tension is properly adjusted, as loose or tight blades can also cause performance issues.

3. Dog Clippers Making Unusual Noises

A loud or strange noise often means the internal parts are loose or damaged. Check the screws and tighten them if necessary. If the problem persists, you may have a damaged motor or worn-out parts. In this case, it’s best to consult a professional or contact the manufacturer for repairs.

4. Dog Clippers Not Turning On

If your dog clippers won’t turn on, check the power source. For corded models, inspect the power cord for damage. For cordless clippers, ensure the battery is charged and seated correctly. If these steps don’t work, there may be an internal electrical issue that requires professional repair.

Conclusion

Maintaining dog hair clippers isn’t complicated. With regular cleaning, oiling, and inspections, you can keep dog clippers in top shape. Proper storage and prompt troubleshooting also go a long way in extending the life of your equipment. By following these steps, you ensure safe, efficient, and stress-free grooming sessions for both you and your pet.

FAQs

1. How Often Should I Clean My Dog Clippers?

After each use clean your dog clippers. Regular cleaning prevents hair buildup and reduces the risk of bacteria, ensuring a safe grooming experience for your pet.

2. What Is the Best Way to Maintain Pet Clippers?

To maintain pet clippers, follow these steps:

• Clean the blades after each use to remove hair and debris
• Oil the blades regularly to reduce friction and prevent overheating
• Check and tighten screws to ensure all parts are secure
• Store the pet clippers in a dry place to avoid rust and damage

For detailed maintenance instructions, refer to the user manual provided with your pet clippers.

3. How Can I Prevent My Pet Clippers from Rusting?

Dry your pet clippers thoroughly after cleaning to prevent rust. Store them in a dry place, and consider using a blade wash solution that includes rust inhibitors.

4. What Are the Signs That My Dog Clippers Need Maintenance?

Signs include:

• Blades pulling or snagging hair
• Unusual noises during the operation
• Overheating of the dog clipper body
• Decreased cutting efficiency

Regular maintenance helps prevent these issues and ensures a smooth grooming experience. For a selection of quality dog clippers, visit the Oneisall collection.