Oneisall Replacement Blades and Guide Combs: How to Find the Right Fit
Your clipper still works, but the blade needs replacing—or a guide comb or charging cable has gone missing. With several similar-looking parts available, the quickest way to choose is to start with the model number on your device.
Oneisall replacement blades are model-specific. Match the device model, the part you need, and any version or attachment details before ordering. A shared brand, similar shape, or matching cutting length does not establish compatibility.
This guide brings together blade, trimmer-head, guide-comb, charging, and grooming-vacuum accessory links so you can go straight to the relevant listing.
1. Identify Your Oneisall Model
Look for a model code on the handle or device label, then compare it with the manual, packaging, or original order. The label location varies by product. Record the complete code, including any suffix or version designation.
- Use the model code: Examples include P2, X2, DTJ-001, DTJ-002, PC18, N12, and YP-7268.
- Check each tool in a bundle: A clipper and paw trimmer can have different models and require different parts.
- Separate model numbers from cutting lengths: PC14 identifies a clipper; a blade number such as #10 or a comb length such as 10mm identifies a cutting option.
If you only remember the product name, compare your order with the Oneisall pet clippers collection and check the manual downloads. Use photos to support the match, not as the only evidence.
2. Confirm Which Part Needs Replacing
- Blade: The cutting component. Match its mounting system and listed device compatibility.
- Complete attachment head: May include a housing as well as the cutting component. Compare the package contents with the piece you need.
- Guide comb: Fits over a compatible cutting head to control trim length. It does not replace the blade.
- Charging part: Match the listed model, connector, and electrical requirements. A cable that fits physically is not automatically suitable.
- Vacuum attachment: Match the grooming-system model and generation, especially where the listing says “New” or “Old.”
Before buying a blade for pulling or uneven cutting, check cleaning, lubrication, seating, and power according to your manual. Stop using chipped or damaged cutting parts. Replacement timing depends on condition and use; multipack “supply” labels are not a guarantee of blade life.
3. Find Oneisall Replacement Blades by Model
The table covers the 24 listings in the replacement blade collection checked for this guide. Open the matching listing to select pack quantity and confirm the included part.
| Model | Replacement parts | Check before ordering |
|---|---|---|
| P2 / X2 / A11 | P2/X2/A11 replacement blade | This shared blade listing does not mean every comb or charger is shared. |
| DTJ-001 | DTJ-001 metal blade | Match DTJ-001, not DTJ-002. |
| DTJ-002 |
DTJ-002 metal blade DTJ-002 narrow blade |
Choose the required blade format and compare the mounting side. |
| PC18 | PC18 metal blade | PC18 compatibility does not establish PC19 compatibility. |
| PC14 | PC14 replacement blades | Select the required blade number and cutting length; see the size table below. |
| CP-9050 | CP-9050 replacement blade | The listing specifies CP-9050 only. |
| RK-034 / RK034 | RK-034 replacement blade | Use the RK-034 listing, not the separate 2601 blade. |
| 2601 | 2601 replacement blade | Listed for Oneisall 2601 cordless horse clippers. |
| YP-7268 | YP-7268 replacement blade | Match the full YP-7268 code. |
| N5; N6 requires confirmation | N5/N6 double blade head listing | The title names N5/N6, but the description specifies N5. Confirm N6 fit with support. |
| P20 | P20 double blade replacement | Listed only for the P20 two-speed double-blade clipper. |
| N12 |
Standard blade head Curved blade head Mini blade head |
Choose the same head type you intend to replace. |
| LGL006 |
Standard blade Small blade |
Standard and small are separate accessory choices. |
| FC10 |
Grooming blade Standard head — listing 1 Standard head — listing 2 Little head — listing 1 Small head — listing 2 Curved head — listing 1 Curved head — listing 2 |
Several listings have similar names. Compare the exact component and mounting side; ask support which listing matches if unclear. |
Using RFC-676? Product instructions say not to disassemble the cutter head. Use the comb and charging links below, and ask support about cutter-head service.
Using PC19 or a model labeled PC14 Pro? Have support match the exact label before ordering a PC18 or PC14 part.
4. Choose the PC14 Blade Number and Cutting Length
The PC14 blade listing offers the following options. These are the listed blade cutting lengths, not guide-comb sizes. Select the length appropriate for your grooming task; very short blades deserve particular care and professional guidance if you are inexperienced.
| Listed blade option | Listed cutting length |
|---|---|
| #10 | 1.5mm |
| #15 | 1.2mm |
| #30 | 0.5mm |
| #40 | 0.25mm |
| #3FC | 13mm |
| #4FC | 9.5mm |
| #5FC | 6.3mm |
| #7F | 3.2mm |
5. Match Guide Combs, Chargers, and Other Clipper Parts
Check compatibility again for each part. For example, the P2/X2/A11 blade fits three named models, while the six-piece comb listing specifically names P2 and X2.
| Model | Replacement parts | Check before ordering |
|---|---|---|
| P2 / X2 | Six-piece guide comb set | Listed lengths: 3, 6, 9, 12, 15, and 18mm. A11 fit is not established by this comb listing. |
| P2 / X3 / X2 / C61 / N6 / A11 / K52NTS | Charging cord | These models are named in the description. Check your device label and connector. |
| 676 | 676 charging cord | The charging listing specifies 676; confirm a different suffix or version before buying. |
| 676 / K52NTS / K2S | Eight-piece plastic guide comb set | Use this set for the models specifically named. |
| RFC-676 | Ten-piece guide comb set | Listed lengths: 1.5, 3, 4.5, 6, 10, 13, 16, 19, 22, and 25mm. |
| RFC-676 / RFC-676 Pro |
10mm metal comb 16mm metal comb |
Select by length: the 16mm page has inconsistent color wording. |
| DTJ-001 | Six-piece guide comb set | Do not infer DTJ-002 fit. |
| CP-9050 | Four-piece guide comb set | The listing excludes other models. |
| RK-034 | Five-piece guide comb set | Listed for RK-034 horse clippers. |
| YP-7268 | YP-7268 USB charger | Listed specifically for YP-7268. |
| N5 | N5 charging cord | The description says N5 only; do not extend this to N6. |
| PC14 |
Guide combs: 3mm, 6mm, or 10mm Replacement battery Charging cord |
The comb listing recommends #30 blades, also allows #15/#10, and advises against #40. Confirm the exact PC14 version. |
| N12 | Nail grinder head | A grinding attachment, not a hair-cutting blade. |
| FC10 |
Combs and attachments Grinding head |
Match the attachment needed and check package contents. |
6. Grooming Vacuum Blades and Accessories
For a clipper supplied with a grooming vacuum, start with the system model. Expand the matching group below to find its blade, clipper, combs, and other accessories.
Version check: Some titles name two models while the description names only one. Those entries are flagged below. A shared product image does not establish interchangeability.
LM2 / LM5
- Replacement blade — Both LM2 and LM5 are named in the description.
- Paw trimmer — Both LM2 and LM5 are named.
- Nail grinder head — Both LM2 and LM5 are named.
- Main clipper and USB charger — Title: LM2/LM5; description: LM2. Confirm LM5 fit.
- Six-piece guide comb set — Description confirms LM2; confirm LM5 fit.
- Sponge filter and HEPA — Description confirms LM2; confirm LM5 fit.
- Deshedding brush — Description confirms LM2; confirm LM5 fit.
- Grooming brush — Description confirms LM2; confirm LM5 fit.
- Dust cup — Description confirms LM2; confirm LM5 fit.
- Long suction head and cleaning brush — Description confirms LM2; confirm LM5 fit.
- Storage tray — Listed for LM2.
- 1.5m hose — old version — Description specifies old-version LM2. Confirm the connector and generation.
- 1.5m hose — new version — Description specifies new-version LM2. Confirm the connector and generation.
- Four-piece accessory set — confirm before ordering — Title names LM2/LM5, but the description names other vacuum brands. Ask support to resolve the mismatch.
Cozy C1 / BM1
- Replacement blade — Description specifies Cozy C1; the title also names BM1. Confirm BM1 fit before ordering.
- Main clipper and USB charger — Description specifies Cozy C1; the title also names BM1. Confirm BM1 fit before ordering.
- Six-piece guide comb set — Description specifies Cozy C1; the title also names BM1. Confirm BM1 fit before ordering.
- Sponge filter and HEPA — Description specifies Cozy C1; the title also names BM1. Confirm BM1 fit before ordering.
- Suction hose — Description specifies Cozy C1; the title also names BM1. Confirm BM1 fit before ordering.
- Blowing hose — Description specifies Cozy C1; the title also names BM1. Confirm BM1 fit before ordering.
- Slicker brush — Description specifies Cozy C1; the title also names BM1. Confirm BM1 fit before ordering.
- Deshedding brush — Description specifies Cozy C1; the title also names BM1. Confirm BM1 fit before ordering.
- Hair-removal roller — Description specifies Cozy C1; the title also names BM1. Confirm BM1 fit before ordering.
- Finger nozzle — Description specifies Cozy C1; the title also names BM1. Confirm BM1 fit before ordering.
- Round nozzle — Description specifies Cozy C1; the title also names BM1. Confirm BM1 fit before ordering.
- Flat nozzle — Description specifies Cozy C1; the title also names BM1. Confirm BM1 fit before ordering.
BM3
- Main dog clipper — New-version BM3 only; listing requests support confirmation.
- Clipper attachment set — New-version BM3 only; confirm the version.
- Small clipper — New-version BM3 only; confirm the version.
- Nail grinder attachment — New-version BM3 only; confirm the version.
- Thin brush — Listed for BM3.
- Bin brush — Listed for BM3.
- Crevice tool — Listed for BM3.
- Rolling brush — Listed for BM3.
Cozy SE2
- Clipper blade attachment — Listed for Cozy SE2.
- Main clipper — Listed for Cozy SE2.
- Three-in-one clipper set — Listed for Cozy SE2; compare included components.
- Small clipper — Listed for Cozy SE2.
- Six-piece guide comb set — Listed for Cozy SE2.
- Nail grinder attachment — Description specifies new-version Cozy SE2.
- Thin brush — Listed for Cozy SE2.
- Bin brush — Listed for Cozy SE2.
Shared USB charging accessory
- LM2 / LM5 / LM5C / Cozy C1 / BM3 USB charger — These models are named in the title. Confirm the powered component and connector; this is not a substitute for a vacuum base power adapter.
7. Complete a Quick Check Before Checkout
- Model: Does the listing name the code on your device?
- Version: Does any “New,” “Old,” or “Pro” restriction apply?
- Part: Are you buying a blade, complete head, comb, charger, or whole clipper?
- Option: Is the pack quantity, blade number, or comb length correct?
- Fit: Do the mounting side, connector, and included components match your existing setup?
Turn the device off and disconnect charging before changing a user-replaceable part. Follow the manual for removal and installation. Do not force a part into place or pry apart a cutter head that is not designed for user removal.
Cannot Find Your Model or Confirm the Fit?
Use the full Oneisall accessories collection for other replacement parts. If the exact fit remains unclear, contact Oneisall support with these details:
- A clear photo of the model label.
- A photo of the complete device and the part to be replaced.
- A photo of the mounting side or charging connector.
- Your original order details and the accessory link you are considering.
You can send: “My device model is [model]. I need a replacement [part]. Can you confirm whether this accessory [link] fits my version? I have attached photos of the label and connector.”
Frequently Asked Questions
Are Oneisall replacement blades universal?
No. Some listings name several compatible models, but that compatibility applies to the specified part. Confirm blades, combs, and chargers separately.
Can I replace the blade on every Oneisall clipper?
Replacement blades are available for selected models. Check your manual before removal. RFC-676 instructions specifically advise against disassembling its cutter head.
Does a 10mm comb fit any Oneisall clipper?
No. The length describes the trimming option, not the mounting system. Choose a comb listed for your clipper and, where relevant, the blade underneath it.
Why are there several FC10 blade links?
The catalog contains multiple similarly named FC10 entries. They are retained here so you can find the listed parts, but the descriptions do not clearly explain every difference. Compare the exact assembly with support before ordering.
What if my model is not listed?
Ask support to identify the correct part from your model label and photos. A similar model number or product picture is not enough to confirm a match.
Leave a comment